Before start

Plug the sink drain to prevent any parts from going down the sink.

1

Unscrew and remove the faucet aerator which is located at the tip of your existing faucet.

tip

You may unscrew the aerator with your bare finger, or use a rubber glove or wet cloth to increase the grip, or use a plier wrench to remove the aerator (wrap the aerator with a layer of cloth to prevent scratches.

2

Detach the faucet adapter from the diverter.

3

Check out your aerator size and type.

if you have a Male aerator, with threads outside or size 15/16″-27T (24mm) M, go to step 4: install adapter.

if you have a female aerator, with threads inside or size 55/64″-27T (22mm) F, directly go to step 5.

4

Install the adapter on to the faucet. Make sure the gasket is on top of the adapter. Screw the faucet adaptor into the faucet, tighten it slightly using a plier. You may wrap a piece of cloth on the adapter to prevent scratches.

5

Install faucet diverter. Before you screw the faucet diverter on to the faucet, make sure there is a gasket on the top of the diverter. You may need the pliers to slightly tighten the diverter.